Common commands for both modes
Here's a reference for commands common to the blockchain and the tx-service modes.
You must first load the sender's private key. When loading an owner, it will be set automatically.
Safe
Create new Safe
You can create a new Safe by running the following command:
_10safe-creator <node_url> <private_key> --owners <checksummed_address_1> <checksummed_address_2> --threshold <uint> --salt-nonce <uint256>
Load Safe
To load a Safe, use the following command:
_10safe-cli <checksummed_safe_address> <ethereum_node_url>
Then you should be on the prompt and see information about the Safe, like the owners, version, etc.
The next step would be loading some owners for the Safe. At least threshold owners need to be loaded to do operations on the Safe, and at least one should have funds to send transactions.
Update Safe
Updates the Safe to the latest version (if you are on a known network like Mainnet).
_10update
Transactions
Send custom transactions
Sends a custom transaction from the Safe account to a contract. If --delegate is set, a delegatecall will be triggered.
_10send_custom <address> <value-wei> <data-hex-str> [--delegate] [--safe-nonce <int>]
Send ether
Sends ether from the Safe to another account.
_10send_ether <address> <value-wei> [--safe-nonce <int>]
Send ERC-20 tokens
Sends an ERC-20 token from the Safe account to a different one.
_10send_erc20 <address> <token-address> <value-wei> [--safe-nonce <int>]
Approve Safe transaction hash
Approves a safe-tx-hash for the provided sender address.
_10approve_hash <keccak-hexstr-hash> <sender-address>
Owners
Add new owner
Adds a new owner address to the Safe.
_10add_owner <address>
Load owners
From private key
Loading owners is unnecessary if you want to do read-only operations.
To load owners:
_10> load_cli_owners <account_private_key>_10Loaded account 0xab...cd with balance=123 ether_10Set account 0xab..cd as default sender of txs
You can also load owners from your environment variables before running the Safe CLI:
_10export MY_PRIVATE_KEY=YOUR_EOA_PRIVATE_KEY
Run the Safe CLI, then:
_10> load_cli_owners MY_PRIVATE_KEY_10Loaded account 0xab...cd with balance=123 ether_10Set account 0xab..cd as default sender of txs
To check the loaded owners:
_10> show_cli_owners
To unload an owner:
_10> unload_cli_owners <ethereum_checksummed_address>
From hardware wallets
Before signing anything, ensure that the data on your hardware wallet device is the same as the Safe CLI data.
If you want to use both Ledger and Trezor, you need to run the following command:
_10pip install "safe-cli[ledger, trezor]"
Ledger
The Ledger module is an optional feature of the Safe CLI to sign transactions with the help of ledgereth (opens in a new tab) library based on ledgerblue (opens in a new tab).
To enable, the Safe CLI must be installed as follows:
_10pip install "safe-cli[ledger]"
When running on Linux, make sure the following rules have been added to /etc/udev/rules.d/:
_10SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0000", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"_10SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0001", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"_10SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0004", MODE="0660", TAG+="uaccess", TAG+="udev-acl" OWNER="<UNIX username>"
Ledger commands
load_ledger_cli_owners [--legacy-accounts] [--derivation-path <str>]: shows a list of the first five accounts (--legacy-accountssearch using legacy derivation) or loads an account from the provided derivation path.
Trezor
The Trezor module is an optional feature of the Safe CLI to sign transactions from the Trezor hardware wallet using the trezor (opens in a new tab) library.
To enable, the Safe CLI must be installed as follows:
_10pip install "safe-cli[trezor]"
Trezor commands
load_trezor_cli_owners [--legacy-accounts] [--derivation-path <str>]: shows a list of the first five accounts (--legacy-accountssearch using legacy derivation) or loads an account from provided derivation path.
Remove owner
Removes an owner address from the Safe.
_10remove_owner <address>
Change threshold
Changes the threshold of the Safe.
_10change_threshold <integer>
Modules
Enable module
Enable module address.
_10enable_module <address>
Disable module
Disable module address.
_10disable_module <address>
Refresh Safe CLI
If the information in the information bar is outdated or there's any problem, you can force the Safe CLI to update the information about the Safe.
_10refresh
Only use the following operations if you are sure about what you are doing, as they can result in all your funds getting lost.
Update fallback handler
Updates the fallback handler to be address. Supported by Safes with version >= v1.1.0.
_10change_fallback_handler <address>
Update Safe Guard
Updates the Safe Guard to be address. Supported by Safes with version >= v1.3.0.
_10change_guard <address>
Update master copy
Updates the master copy to be address. It's used to update the Safe.
_10change_master_copy <address>
Update to L2
A non-L2 Safe can only be migrated to L2 if the non-L2 Safe was not used before (nonce must be zero).
Updates a v1.1.1, v1.3.0, or v1.4.1 non-L2 Safe to an L2 Safe supported by Safe {Wallet}.
The migration contract address needs to be provided.
It can be found here (opens in a new tab).
The nonce for the Safe must be 0, and supported versions are v1.1.1, v1.3.0, and v1.4.1.
_10update_to_l2 <address>